| 物品名称 |
规格型号 |
数量 |
单位 |
描述 |
| 抬包喷射器 |
TB** |
**.** |
个 |
{"型号":"TB**","所属设备名称":"**吨真空抬包","设备型号":"TB*******家":******","国产/进口":"国产","使用寿命":"***天","特殊要求":"各焊口完好，无裂纹","参照标准":"缓冲箱：GB/T*****-****；喇叭口、葫芦头：JB/T****.*-****；喷射器：GB/T***-****","备注":"**T真空抬包配件"} |
| 抬包喷射器头 |
TB** |
**.** |
个 |
{"型号":"TB**","所属设备名称":"**吨真空抬包","设备型号":"TB*******家":******","国产/进口":"国产","使用寿命":"***天","特殊要求":"各焊口完整，无裂纹","参照标准":"JB/T****.*-****","备注":"真空抬包配件"} |
| 抬包喷射器 |
TB** |
**.** |
个 |
{"型号":"TB**","所属设备名称":"**吨真空抬包","设备型号":"TB*******家":******","国产/进口":"国产","使用寿命":"***天","特殊要求":"各焊口完好，无裂纹","参照标准":"缓冲箱：GB/T*****-****；喇叭口、葫芦头：JB/T****.*-****；喷射器：GB/T***-****","备注":"**T真空抬包配件"} |
| 抬包喷射器头 |
TB** |
**.** |
个 |
{"型号":"TB**","所属设备名称":"**吨真空抬包","设备型号":"TB*******家":******","国产/进口":"国产","使用寿命":"***天","特殊要求":"各焊口完整，无裂纹","参照标准":"JB/T****.*-****","备注":"真空抬包配件"} |
| 气动打壳机 |
QK***B |
*.** |
台 |
{"型号":"QK***B","材质":"**#钢","所属设备名称":"多功能天车","设备型号":"LK:**.*******家":"中国有色（沈******，国产","国产/进口":"国产","使用寿命":"*年"} |
| 气动打击头 |
**YB**** |
*.** |
个 |
{"型号":"**YB****","图号":"无","材质":"**CrMnMo","所属设备名称":"多功能天车","设备型号":"PTM**(**+**G**.*mA*-I******家":"中国有色（沈******","国产/进口":"国产","使用寿命":"≥****天","特殊要求":"*.打击头冲击功；>***J 冲击频率；****次/每分 钟 工作空气压力；*.*-*.*MPa 耗气量约*.*立方米每分钟。*.材质；**CrMnMo******理硬度；**HRC-**HRC 工作表面粗糙度Ra参数值不大于*.*. *.缸体与锤胆配合间隙控制在*.***mm-*.***mm","参照标准":"YS/T *-****","备注":"如遇技******理。"} |
| 斗提下滚筒 |
D*** |
*.** |
个 |
{"型号":"D***","材质":"轴材******位材质为Q***B","厚度":"*","克重":"*","使用寿命":"≥*个月","参照标准":"JB/T ****-****"} |
| 电动滚筒 |
TDY** |
*.** |
个 |
{"型号":"TDY**","材质":"轴承座、滚筒端盖为铸铁，滚筒为铸钢，滚筒表面包胶，","厚度":"*","克重":"*","所属设备名称":"皮带输送机","国产/进口":"国产","使用寿命":"不低于*年","特殊要求":"电压：***v；频率：**hz；使用环境温度：-**℃-**℃；胶带速度：*m/s，滚筒直径：***mm,功率：**KW，胶带宽度：*******距为****mm，滚筒长度为***mm，两轴承外侧距离为**********距高***mm，轴承座两螺栓孔距***mm，滚筒防******星齿轮，冷却方式为油冷式"} |
| 直线滚子组 |
WT*.K*.* |
*.** |
个 |
{"型号":"WT*.K*.*","材质":"支架材质：Q***A，重载滚子材质:GCr**","厚度":"*","克重":"*","使用寿命":"≥*个月","参照标准":"JB/T ****-****"} |
| 提升机料斗 |
D*** |
***.** |
个 |
{"型号":"D***","材质":"**#钢","厚度":"*","克重":"*","允许偏差":"±*mm","所属设备名称":"斗式提升机"} |
| 软残极抛丸机叶片 |
HSQ*** |
**.** |
个 |
{"规格型号":"HSQ***","图号":"HSQ***","材质":"耐磨铸铁","所属设备名称":"软残极抛丸机","设备型号":"HSQ**N******家":"青岛******","国产/进口":"国产","使用寿命":"**天","特殊要求":"无","参照标准":"GB/T *****-****","备注":"验收标准：严******加工，工件不得有明显孔眼，裂纹，表面缺陷，形状缺陷等影响产品的外观和强度缺陷。\n若不符合技术要求或质量问题，则退换货，产生的所有费用由供货商提供。"} |
基本情况
公告正文
相关单位
民营企业 收藏 监控
信息时间线
商机跟进
相关推荐